Backflow Testing in Fort Myers, FL: A Homeowner’s Guide

Got a letter saying your backflow preventer is due for a test? This guide explains what a backflow preventer does, which Fort Myers-area homes need one, how often it has to be tested, and what happens if it fails.

We’re a free referral service, not a plumbing company. If you need a tester or a repair, we pass your request to an independent local plumber. The rules below come from the utilities and the State of Florida, and we link the sources at the end.

What a backflow preventer does

Normally, water flows one way: from the utility’s main, through your meter, and into your home. Backflow is when water reverses direction. That can happen when pressure drops in the main during a main break or heavy firefighting use, or when your side of the system has higher pressure. If a sprinkler system, well, pool fill line or fertilizer injector is connected, backflow can pull lawn chemicals or untreated water into the drinking water supply.

A backflow preventer is a valve assembly, usually near the meter or at the start of the irrigation line, that only lets water go one way. Utilities call the connection points “cross-connections” and run cross-connection control programs to keep them protected.

Which homes need one

Each utility sets its own policy within Florida’s rule. For Lee County Utilities (unincorporated Lee County, including much of Lehigh Acres, Estero, San Carlos Park and North Fort Myers), the Cross-Connection Control Policy says protection is required at a residential service when the property has:

  • An irrigation system on potable water
  • Reclaimed water or another auxiliary supply, such as a private well
  • A fire sprinkler system
  • Any actual or potential cross-connection found during an inspection

The City of Fort Myers lists a backflow preventer as a requirement for irrigation permits, and its plumbing and irrigation permit checklist says assemblies must be tested by a certified backflow prevention assembly tester with results sent to the Utilities Division’s Cross Connection Control Program. In Cape Coral, the City’s irrigation service rules put the duty on the water user to have the device inspected at least once a year. If you’re not sure which utility serves you, check your water bill.

How often testing is required

Device or situation Minimum frequency Source
Residential testable assembly (Florida minimum) After installation or repair, then at least every 2 years F.A.C. 62-555.360
Non-residential testable assembly After installation or repair, then at least yearly F.A.C. 62-555.360; LCU policy
Dual check device (not testable in place) Refurbished or replaced every 5 to 10 years LCU policy
Cape Coral irrigation-water users Inspected at least once a year City of Cape Coral

Your utility can be stricter than the state minimum. The date and frequency on your utility’s notice letter is the one that counts.

What happens during a test

  1. The tester confirms the assembly type, size and serial number.
  2. Water is briefly shut off while gauges are attached to the test cocks. Plan for a short interruption.
  3. The tester checks that each check valve holds and, on an RP assembly, that the relief valve opens when it should.
  4. The result is filed with the utility. Lee County Utilities takes reports electronically through BSI Online, and the tester needs your meter number and customer confirmation number from the notice.

Ask for a copy of the test report for your records. If you’re selling the house or your utility asks later, it’s your proof.

If it fails

Common causes are worn rubber parts, debris stuck in a check valve, or a relief valve that drips. Many failures are fixed with a rebuild kit. Older or damaged assemblies may need replacing, which can require a plumbing permit. In Cape Coral, for example, the City’s backflow permit submittal sheet says a registered plumbing contractor submits domestic-line backflow permits. After the repair, the assembly gets retested. Lee County Utilities’ policy gives 30 days from notification to finish repairs and submit a passing report, and an assembly that isn’t working can be grounds for disconnection.

Also watch for warning signs between tests: water dripping or spraying from the relief valve, a sprinkler system that suddenly loses pressure, or cloudy or odd-smelling water after work on the main. Those are worth a call to a plumber sooner. See leak detection in Fort Myers if water is showing up where it shouldn’t.

Typical costs (planning only)

Job Typical range
Routine residential backflow test and report filing $50 – $150
Rebuild kit and labor after a failed test $150 – $400
Replace a residential assembly (3/4" to 1") $300 – $900+

Typical market ranges, not quotes. Prices depend on the device, access and permit needs, and independent plumbers set their own prices. For other jobs, see plumbing costs in Fort Myers.

Tips for hiring a tester

  • Ask whether the price includes filing the report with your utility.
  • Ask for the tester’s backflow certification number, and check the plumbing license of whoever does repairs at myfloridalicense.com.
  • Book a few weeks before your deadline so a failed test leaves time for repairs.
  • Be wary of unsolicited “your backflow is due” calls or flyers. Compare them against the notice from your actual utility.

Frequently asked questions

Does my Fort Myers home need a backflow preventer?
It depends on your water provider and what’s connected to your plumbing. Lee County Utilities’ cross-connection policy requires protection at a residential service when there’s an irrigation system, reclaimed water, an auxiliary supply such as a well, or a fire sprinkler on site. Many homes with only standard plumbing don’t need a testable assembly. Your utility’s notice letter or customer service can confirm what applies to your address.
How often does a residential backflow preventer need testing?
Florida’s rule for public water systems (F.A.C. 62-555.360) sets a minimum of testing after installation or repair and then at least every two years for residential assemblies, and at least yearly for non-residential ones. Utilities can be stricter, and Cape Coral requires yearly inspections for irrigation-water users. Follow the frequency in your utility’s notice.
Who can test my backflow preventer?
A certified backflow prevention assembly tester. Many plumbers and irrigation companies have a tester on staff. Ask for the tester’s certification and make sure they file the report the way your utility requires, such as Lee County Utilities’ BSI Online system.
What happens if my backflow preventer fails the test?
The assembly has to be repaired, rebuilt or replaced and then retested. Lee County Utilities’ policy gives customers 30 days from notification to finish repairs and submit a new passing test report. Replacing an assembly can need a plumbing permit, so ask the plumber who pulls it.
Is a dual check valve the same as a testable backflow preventer?
No. A dual check is a small device often built into the meter setup and can’t be tested in place. Lee County Utilities’ policy has dual checks refurbished or replaced every 5 to 10 years instead. Testable assemblies, like a reduced pressure (RP) assembly, have test cocks and get a gauge test.

Sources

Sources checked October 26, 2026. Rules change, so confirm with your utility before you rely on them.

Get a free quote

Tell us what’s going on. A local, independent plumber can reach out, usually the same business day. Florida requires plumbers to be licensed, so please verify any plumber’s license at myfloridalicense.com before hiring. There’s no cost to request a quote.

    A free referral service for Fort Myers, Cape Coral & Lee County. We pass your request to an independent local pro. Not a contractor.

    Get a free quote